Palestine Roof Pros provides professional chimney flashing in Palestine, TX for residential and commercial properties across the western edge of East Texas. No single feature generates more leak calls for us than a chimney, and on the western side of this territory the roof is almost never at fault. The chimney and the house it rises through simply do not travel together.
Masonry stands on a footing of its own. The dwelling around it rests on a slab or on piers. Where ground swells and shrinks seasonally, those two supports rise and fall on separate schedules, and the joint between must absorb the difference. A one-piece counterflashing mortared into a bed joint absorbs nothing. It cracks the mortar, opens a hairline along the high side, and admits water in the exact volume that produces a stain and no visible defect.
So on reactive ground we build the detail to move. Step flashing laced in course by course, both sides, all the way up. A separate two-piece counterflashing let into a saw-cut reglet, mechanically fastened, sealed at the reglet only, and lapped over the step flashing with a free vertical overlap rather than fixed to it. That overlap is the slip joint, and it lets a quarter inch of seasonal travel happen without opening a path.
A cricket goes on the high side of anything wider than thirty inches. Without it, the chimney is a dam across the slope and debris packs behind it and holds moisture against the masonry all winter. We build ours from framing and metal rather than piling shingles into the corner and calling the resulting lump a cricket, which is what we usually find when we take one apart.
East of Palestine, on the stable sandy ground, the honest answer is often simpler and cheaper. If the masonry is sound and the existing step flashing is intact, cutting a clean reglet and setting new counterflashing is a half-day job. We are not going to invent a reason to rebuild something that is working, and on that side of the county it usually is working.
Crown and cap are part of this and get skipped. Once the crown cracks, water gets down inside the brickwork itself, and on the handful of freezing nights we get each winter it expands there and spalls the masonry from within. A crown repair and a proper rain cap frequently do more for a chimney than anything we do to the flashing around it.
Our licensed and insured team brings the right materials and equipment to every job — two-piece counterflashing set into a saw-cut reglet, step flashing laced course by course into a sidewall, SBS-modified asphalt laminate shingle, concealed-clip standing seam panel, twenty-six gauge exposed-fastener metal panel, self-adhering membrane at valleys and penetrations — and backs the work with a written workmanship warranty. We serve Palestine and nearby communities including Elkhart, Frankston, Athens, Corsicana.
What We Handle
Everything our chimney flashing in Palestine covers
One crew, one point of contact, and the full range of chimney flashing work in Palestine, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- chimney flashing
- counterflashing
- step flashing
- chimney leak repair
- chimney cricket
- reglet cut
- chimney crown repair
- rain cap
- masonry flashing
- chimney saddle
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Palestine services.
Materials, equipment and how we do chimney flashing
The difference between chimney flashing that lasts and chimney flashing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with two-piece counterflashing set into a saw-cut reglet, step flashing laced course by course into a sidewall, SBS-modified asphalt laminate shingle, concealed-clip standing seam panel, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Palestine job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the western edge of East Texas means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do chimney flashing outside Palestine
Palestine Roof Pros covers Palestine and the surrounding communities of the western edge of East Texas. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Chimney Flashing in Elkhart, TX — Anderson County, population 1,287
- Chimney Flashing in Frankston, TX — Anderson County, population 1,126
- Chimney Flashing in Athens, TX — Henderson County, population 12,857
- Chimney Flashing in Corsicana, TX — Navarro County, population 25,109
- Chimney Flashing in Fairfield, TX — Freestone County, population 2,850
- Chimney Flashing in Teague, TX — Freestone County, population 3,384
Start on the Palestine Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Palestine Chooses Palestine Roof Pros
- ✓We quote ground first, framing second, covering third, because on this territory the soil under a house changes the correct roof detail more than the house does.
- ✓Two opposite gutter recommendations inside one service area, and we will tell you which one your address gets before you ask for a price.
- ✓Reports separate weather damage from wear from ground movement, because insurers treat those three completely differently and a mixed list helps nobody.
- ✓We refuse work regularly: no coating over shingles, no aluminum over rotten wood, no re-roof on a house with foundation work pending.
The standards behind chimney flashing
Quality here is not a matter of opinion — it is written down. The chimney flashing work we do in Palestine follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every chimney flashing project in Palestine gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free chimney flashing free estimate in Palestine, or request a quote and we'll get right back to you.